How to install the handle of the cabinet

How to install the handle of the cabinet
Installation steps of cabinet handle:

1. Measure the installation hole distance with a ruler.

2. Draw the cabinet door panel with a handle and measure the installation position on the cabinet door (wardrobe or cabinet); (Don't underestimate the position of the installation handle. If you don't arrange the position properly, it will not only reduce the value of the appearance of the cabinet, but also bring inconvenience to your daily use.)

3. Select a drill bit of appropriate size, plug in the electric drill, and drill the screw installation hole with the drill bit;

4. The outside holds the handle, and the inside thread the screw from the inside of the cabinet to the outside;

5. Align the screws with the handle mounting holes and tighten them with screws### The installation position of the aluminum alloy handle of the cabinet is very exquisite. It should be convenient for the owner to use and not interfere with the owner, and it should be beautiful and solid. These are the characteristics of the aluminum alloy handle. The luxury aluminum alloy handle of the cabinet is more suitable and beautiful. In order to meet the requirements of ergonomics and meet the visual beauty of form when installing cabinets, it is suggested that the upper handle should be installed at the lower corner of the door, and the lower handle should be installed at the upper corner of the door. The installation is very simple. Just make holes in the cabinet door plate and install screws

Recommend a high-quality manufacturer aosituohandle


本文地址:http://www.snl.cn/article/2268

↑上一篇: Cabinet handle is better than invisible handle or open handle
↓下一篇: Which kind of cabinet handle is the most practical

填写您的需求/意见获取项目报价。

*请认真详细填写需求信息(简单留言均不回复!!!!留言样板!!! 戳>>),SNL会在24小时内与您取得联系。
线上服务咨询扫码关注SNL020-86000345填写需求索取报价

Copyright © 2003-2021 SNL 版权所有 广州市天传计算机网络技术有限公司 粤ICP备14094397号